Visual Studio

Page 2786




  • Topics
    Replies
    Last post
  • After install, no compilers listed in Start Menu - Problem Solved
    by George Nubie
    3 Replies
    Last post by George Nubie
      • I installed Visual Studio 2005 Pro with no problems. I tried to start a Visual Basic Project, as the documentation said, "To create a project for your program, from the Windows Start menu, choose Microsoft Visual Basic 2005 Express Edition." However, there is NO Microsoft Visual Basic in the program list in ANY Microsoft section. None of the other compilers either (like C++, C#, J#).
  • Application Hangs,data in remoting proxies show "Cannot evaluate expression because a native frame is on top of the call stack"
    by radrain
    3 Replies
    Last post by Richard Drain
      • In converting existing applications to VS2005 we have encountered this problem. I created a small test application to reproduce what we see in our ASP.NET code. The C# test application first creates an Object using 'Activator.GetObject' specifying a well known port and URI for the C# Object. The C# code then attempts to call a method on that object and the application hangs. When I break into the
  • Xsl stylesheet for "Export diagram as HTML"
    by Schencki
    1 Replies
    Last post by Ramesh Rajagopal
      • Before I go off and do this myself, I thought I'd check with the community to see if there is a nice transfomation in order to generate "design document" type outputs. Is there
  • visual studio 2005 sp1 update fails under XP
    by Dave Ream
    10 Replies
    Last post by QualyLee
      • I've downloaded VS80sp1-KB926601-X86-ENU.exe After the extracting finishes, it complains: "The installation source for this product is not available. Verify that the source exists and that you can access it." I can run VS2005 v8.0xxx. I've put the CD in the drive but it never really gives me an opportunity to verify anything. When I click OK, the dialog disappears and nothing happe
  • Different ConnectionString settings for Debug and Release
    by Simon Jones - MSDL
    4 Replies
    Last post by sluggy
      • I have a Windows Forms application which needs to connect to a database on one SQL Server when debugging and a different SQL Server for release. In the release config a Setup project builds the relevant MSI file. In debug, of course, there is no MSI file. The ConnectionString is a setting in the My Project designer which writes the app.config file. How do I have different values for
  • Is there a way to view all file changes under a directory?
    by WXS123
    7 Replies
    Last post by WXS123
      • I want to get the list of files changed under a directory hierarchy (not the changesets), I don't care about the other files changed outside of the directory hierarchy I want to look at (that would just be noise). Is there a way to get this information without digging into every changeset Thanks,
  • Network mix .
    by Winne's
    1 Replies
    Last post by Bill Barnett - MSFT
      • Hi Can we customize the network speeds manually apart from the network speeds defined in the tool.. Thanks.
  • How to escape the $() notation?
    by Peli
    1 Replies
    Last post by Eugene.z
      • I'd like to pass the following string to one of my custom task, whithout any property expansion. $(var.SomeVar) How should I 'escape' the property notation so that msbuild does not think var.SomeVar is a property
  • Quality Indicators Report Question
    by Lee R.
    6 Replies
    Last post by Sanjeev Garg MSFT553516
      • The Quality indicators report gives you the option to choose a build type, but it doesn't seem to change anything. I would think that choosing a specific build would change the list of available builds to only include those of that type. In my case they do not. I have a development build and a production build off of two different branches and this report includes everything unless I manually go i
  • Properties page - custom project type
    by CBrookes86
    8 Replies
    Last post by CBrookes86
      • I have created a custom project type for visual studio through the SDK. When I test my package, I can create a project of my custom type but when i and try and right click the custom project node in the solution explorer and select properties I get this error: "Class not registered. Looking for object with CLSID: {00000000-0000-0000-0000-000000000000}" My question is in two parts. 1) Wha
  • How to pass value from Windows form to Crystal Report?
    by HSBF Lewe
    5 Replies
    Last post by JMyster
      • Hi, How to pass value from Windows form to Crystal Report
  • Unit Tests and MSBuild
    by MylesOtter
    1 Replies
    Last post by MylesOtter
      • I¡¯m having difficulty with making tests part of the msbuild process. I am attempting to get the unit tests to run as part of the build process, but I am consistently getting errors (mostly complaining about not being able to find the compiled tests ¨C see below). The unit tests are generated from MS VS 2005 Team Edition for Software Testers. Are there any specific tricks to get unit tests
  • Windows authentication turned on but VS claims it is not
    by Dariusz
    6 Replies
    Last post by BalochDude
      • I have a Web application under Visual Studio Codename 'Orcas' on Windows Vista and IIS 7 which was running correctly until yesterday. When I tried to run it today Visual Studio throws "Unable to start debugging on the server. Debugging failed because integrated Windows authentication is not enabled". When I check IIS settings Windows authentication is enabled. I don't know what co
  • Load Testing of Java based applications
    by Sneh Mani Tripathi
    2 Replies
    Last post by Sneh Mani Tripathi
      • Hi, Can we used load testing of Java based applications i VS2005 team suite
  • Exclusive Check Out Error !!
    by soujanya
    4 Replies
    Last post by Alin Constantin - MSFT
      • Hi All, I'm using VSS 2005. When I tried to check out my project, some files got checked out properly whereas for others there a message that the file has been exclusively checked out. The code is being used from only my system and I only have the access to check-in or check-out. I don't understand how this exclusive check-out has occured. All the files in the project when viewed in
  • VC 2005 does not copy files when publishing a web site
    by wjlong6
    9 Replies
    Last post by Gpat
      • I have recently converted a .net 1.1 web application to .net 2.0. The conversion went very well. I was very pleased with the wizard. The application runs well from inside the development environment. Problem is when I try and publish the web site... no files ever get copied to the output directory. Any ideas would be appreciated Bill
  • Can ¡®Visual Studio 2005 Team Edition for Testers¡¯ be used for creating test framework by functional decomposition approach.
    by 2162
    3 Replies
    Last post by 2162
      • Can ¡®Visual Studio 2005 Team Edition for Testers¡¯ be used for creating test framework by functional decomposition approach. Is it possible to call libraries/other tests Is there some way to call other methods/functions/tests
  • Problems installing visul studio
    by Kakaruko
    2 Replies
    Last post by huang yinghao
      • While Im installing visual studio i receive this err 1335 file -14311_VC80_PDB_WINSXS_ATLMFC_x86.msm and it says microsoft visual studio 2005 professional edition - ENU failed to install. can somebody help me /
  • Visual Studio has encountered a problem and needs to close.. {?}
    by Jeroen Nijhuis
    0 Replies
    Last post by Jeroen Nijhuis
      • Hello, I have a big problem with my copy of Visual Studio 2005, since a few hours i'm getting Errors from VS2005.. especially when i try to open a combobox out of the properties panel.. I never had these problems with VS2005.. and it just started today.. I tried ReInstallation several times.. I totally updated my Windows.. and it still comes with these errors.. asking me too send an Error Report
  • how to find out Datageneration plan exection time
    by Anonymous551183
    9 Replies
    Last post by Anonymous
      • Hi , I have created a datageneration plan , using vsts db pro. Even it is inserting rows in the database. but i want to see how much time it is taking for inserts. is there any way to find out that Please let me know... thanks
  • Using FxCop
    by Tryin2Bgood
    4 Replies
    Last post by David M. Kean - MSFT
      • Can someone send me a link on how i need to operate using GxCop...There are some things I am cludy on as far as how do i know something has been corrected....I correct something and it seems not to update after I build my sln and then re-analyze the dll in FxCop...The same errors come back...and I know it has to be fixed....any help on where I could find a little help
  • report size
    by ash564711
    2 Replies
    Last post by ash
      • Hi, I have about 20 fields to show in the report from a stored procedure, but when I populate all the 20 fields in the report they are squeezed to fit into it. How do I increase the width of the report. Not thought code but by going through the may be the nemu items. Thanks
  • FxCop 1.35 Feedback
    by David M. Kean - MSFT
    18 Replies
    Last post by David M. Kean - MSFT
      • Hi guys. Almost missed this release, downloaded it yesterday and have been playing around with it. Looks good. Here is a couple of minor things that I found: Documentation: 1. The help provided with FxCop still has version 1.32.0 throughout it. The online documentation has 1.312. Also both don't have any documentation on the new rules (ExceptionsShouldBePublic and AttributeStringL
  • Bug: Creating a branch when a folder was moved
    by J. Marsch
    1 Replies
    Last post by Tan Phan
      • I have posted this to the MS connections feedback site, but I thought I'd also throw it in the forums, in case someone has already run onto this. The bug posting is here: https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx FeedbackID=308317 Basically, I follow the "feature branch" pattern. I branch my code to a folder in order to work on a feature. One of
  • Team Tester supports HTTP/HTTPS Protocols for Load Testing..
    by satsrinivasan
    2 Replies
    Last post by ssrinivasan
      • By going thru msdn help came to know that Team Tester supports http/https requests for Load Testing. We are using different Automation testing tool for load Testing and this tool supports Soap calls, BITS.. We are trying to see if Team tester supports these kind of calls too Please let us know the Supported environments, Protocols and Interfaces for Load Testing. Or if there is a li